Copper rod production machine is mainly suitable for transformers, reactors, voltage regulators and other electrical equipment manufacturing countries coil crimping process . In particular, the beginning of a rectangular coil and core transformer elliptical coil crimping shaping.

Main selection: 1. Frequency converter adopts inovance. brand; Bearings using Japan's NSK brand;The oil seal adopts import brand. 2. The motor adopts the domestic first-class brand 3. Low-voltage electrical appliances, contactors (schneider brand), precision resistors, brakes and so on adopt domestic and foreign first-class brands. 4. The tower wheel is made of carbon fiber.

One machine with two lines Feedstock wire specification: Sectional area: 5～50mm2; Silk yarn : inner dia :42mm silk yarn length: 75mm silk yarn tube length: 90mm Products variety: double fiberglass wrapping line, film double fiberglass wrapping line;

High speed flat wire enamelling machine

Mainly Production scope 1.One machine with one product line 2.Feedstock:section : 10～80 mm2 3.Concentric film tapping heads 4.Wrap bobbin size:outer dia Φ330mm,inner dia ø76mm,lock film width 10～130mm 5.Supply voltage:415v 50Hz 6.Direction: right(enter),left(exit),when facing the machine

The annealing furnace is designed and developed by our company for non-oxidizing bright annealing of non-ferrous metals (such as copper wire, copper pipe, copper belt, etc.) and ferrous metals (such as electrode wire, copper clad steel wire, stainless steel wire, etc.).

Two-high reversible Rolling Machine is used for processing of the copper and aluminum Busbar

Extrusion is one of the main production methods of nonferrous metals, iron and steel materials production and parts production, parts forming processing. Our Extrusion Machine is for Copper Rod ,Busbar and Aluminum section wire.

Extrusion is one of the main production methods of nonferrous metals, iron and steel materials production and parts production, parts forming processing. Our Extrusion Machine is for Copper Rod ,Busbar and Aluminum section wire.

Main selection: 1. Frequency converter adopts inovance. brand; Bearings using Japan's NSK brand;The oil seal adopts import brand. 2. The motor adopts the domestic first-class brand 3. Low-voltage electrical appliances, contactors (schneider brand), precision resistors, brakes and so on adopt domestic and foreign first-class brands. 4. The tower wheel is made of carbon fiber.

The drawing machine is applicable to the drawing of copper bars, copper rod and other materials via the mold. The well-drawn finished products can achieve the goals of higher accuracy, brighter surface, greater hardness and elasticity and difficult deformation. Such a hydraulic drawing machine is presently the substitute of chain drawing machine because it can substantially reduce operating employees, ease labor intensity and improve the operators’ safety while having best performance and high automatic. The length of the machined products can set out of the total length range as required.

The Double Layer Vertical Taping Machine Suitable for copper wire and cable wrap polyester tape, mica tape, transparent tape, PTFE film, aluminum foil paper, etc